An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Metal Finishes And Finishing Processes A Mil-Specs - FSC MFFP

DI-MFFP-81972 United States Air Force (USAF) Corrosion Prevention and Control Plan Documentation

AA1 - Aluminum Standards And Data

AA45 - System Designation For Aluminum Finishes

AA46 - Aluminum, Anodized Architectural

AAMA603.8 - Aluminum, Extruded, Pigmented Organic Coatings On

This specification describes test procedures and performance requirements to evaluate pigmented organic coatings applied to aluminum extrusions for windows, doors and similar products made from aluminum extrusions.

AAMA605.2 - Aluminum Extrusions And Panels, Architectural, High Performance Organic Coatings On (See Notice Of Withdrawal For Replacement Information)

This specification describes test procedures and requirements for high performance organic coatings applied to aluminum extrusions and panels for architectural products.

AAMA610.1 - Aluminum Extrusions And Curtain Wall Panels, Painted, Voluntary Guide Specification For Cleaning And Maintenance Of (See Notice Of Withdrawal For Replacement Information)

This recommendation covers procedures for cleaning and maintenance of painted aluminum extrusions and curtain wall panels.

AWS-C2.16 - Thermal Spray Operator& Equipment Qualification, Guide For

This guide provides for the qualification of operators and equipment used for applying thermal sprayed coatings.

DOD-STD-2182 - Engineering Chromium Plating (Electrodeposited For Repair Of Shafting (Metric)

This Military Standard establishes uniform standards for repair and refurbishment of shafting not subject to sea water service.

MIL-A-40147 - Aluminum Coating (Hot-Dip) For Ferrous Parts

MIL-A-63576 - Aluminum Oxide Coatings, Lubricative, For Aluminum And Aluminum Alloys

MIL-A-81801 - Anodic Coating For Zinc And Zinc Alloys

This specification covers the requirements for electro-lytically formed anodic coatings on wrought or die cast zinc parts, on electrodeposited, on mechanically deposited and on hot dipped steel, or over thermal sprayed zinc.

MIL-A-8625 - Anodic Coatings For Aluminum And Aluminum Alloys

This specification covers the requirements for six types and two classes of electrolytically formed anodic coatings on aluminum and aluminum alloys for non-architectura lapplications.

MIL-B-47142 - Bonding, Laminating And Insulating Magnetic Steel Electrical Laminations, Material And Process For

MIL-C-11436 - Chromium, Gray Plated (Use Mil-N-55392)

MIL-C-14550 - Copper Plating (Electrodeposited) (S/S By Sae-Ams2418)

This specification covers electrodeposited copper plating on metal surfaces.

MIL-C-17711 - Coatings, Chromate, For Zinc Alloy Castings And Hot Dip Galvanized Surfaces

This specification covers chromate coatings for use with zinc base alloy cast surfaces and hot-dip galvanized surfaces.

MIL-C-20218 - Chromium Plating, Electrodeposited, Porous

This specification covers porous, electrodeposited chromium plating applied to surfaces where a lubricating film must be sustained such as cylinder bores.

MIL-C-23217 - Coating, Aluminum, Vacuum Deposited (Asg)

MIL-C-47267 - Cleaning And Surface Preparation, Vapor Blast

This specification covers the cleaning and surface preparation of ferrous, non-ferrous, and non-metallic materials by the vapor blast process.

MIL-C-60536 - Coating, Anodic, Hard, For Aluminum And Aluminum Alloys (S/S By Mil-A-8625)

MIL-C-60539 - Coatings, Anodic, Conventional, For Aluminum And Aluminum Alloys (S/S By Mil-A-8625)

MIL-C-81562 - Coatings, Cadmium, Tin-Cadmium And Zinc (Mechanically Deposited) (S/S By Sae-Ams-C-81562)

MIL-C-81740 - Coatings, Aluminum And Aluminum Alloys (Metallic Compound Decomposition)

This specifications covers the requirements for aluminum and aluminum alloy coatings deposited by decomposition of metallic compounds on ferrous and non-ferrous metals.

MIL-C-81751 - Coating, Metallic-Ceramic

This specification covers the requirements of metallic-ceramic coatings to provide corrosion and oxidation protection of metallic substrates.

MIL-C-81769 - Chemical Milling Of Metals, Specification For (S/S By Sae-Ams-C-81769)

MIL-C-81797 - Coating, Inorganically Bonded Aluminum (Electrophoretically Deposited)

This specification covers the requirements of inorganically bonded aluminum coatings, electrophoretically deposited, to provide corrosion and oxidation protection of ferrous alloys and other metallic subtrates.

MIL-C-85455 - Chromium-Molybdenum Plating (Electrodeposited)

MIL-C-85614 - Coating, Fastener (Titanium And Cres Alloys), Aluminum Pigmented, Organically Bonded (For All Threaded And Unthreaded Fasteners)

This specification covers the acceptance requirements for an aluminum pigmented, organically bonded coating applied at temperatures not greater than 450 deg. F to all threaded and unthreaded fasteners made from titanium and corrosion resistant steel alloys.

MIL-C-87115 - Coating, Immersion Zinc Flake/Chromate Dispersion

This specification covers zinc flake/chromate dispersion coatings which shall be topcoated with a clear, no sealer, or black sealer.

MIL-C-8837 - Coating, Cadmium (Vacuum Deposited) (S/S By Sae-Ams-C-8837)

This specification covers the requirements for three types and three classes for vacuum deposited cadmium coating.

MIL-DTL-13924 - Coating, Oxide, Black, For Ferrous Metals

This specification covers black oxide coatings applied to ferrous metals (wrought iron, carbon, low alloy, and corrosion resistant steels). Black oxide coatings, with or without a supplementary preservative treatment, may be used where a black surface is required. Only very limited corrosion protection, under mildly corrosive conditions, is obtained as a result of black oxide coating.

MIL-DTL-14072 - Finishes For Ground Based Electronic Equipment

This specification covers requirements for finishes necessary to protect ground electronic equipment from the deteriorating effects of climatic conditions encountered in military use.

MIL-DTL-14538 - Chromium Plating, Black (Electrodeposited)

This specification covers an electrodeposited black chromium finish. It is generally applied to steels but may be used as a plating for other metals such as brass, copper, iron and chromium

MIL-DTL-16232 - Phosphate Coating, Heavy, Manganese Or Zinc Base

This specification covers two types of heavy phosphate coating for ferrous metals, applied by immersion. The coatings consist of a manganese phosphate or zinc phosphate base and, when specified, a supplementary treatment.

MIL-DTL-23422 - Chromium Plating, Electrodeposited

This specification covers the requirements for electrodeposited chromium plate for applications where high quality hard chromium plate is required.

MIL-DTL-26074 - Coatings, Electroless Nickel Requirements For (See Notice 1 For Replacement Information)

This specification covers the requirements for medium and high phosphorous electroless (autocatalytic chemical reduction) deposition of nickel-phosphorous alloy coatings on metal and composite surfaces.

MIL-DTL-45204 - Gold Plating, Electrodeposited

This specification covers electrodeposited gold plating on metallic surfaces (see 6.1).

MIL-DTL-5002 - Surface Treatments And Inorganic Coatings For Metal Surfaces Of Weapons Systems

This specification covers the requirements for cleaning, surface treatment, and application of inorganic coatings for metallic surfaces of weapons systems parts.

MIL-DTL-5541 - Chemical Conversion Coatings On Aluminum And Aluminum Alloys

This specification covers chemical conversion coatings formed by the reaction of chemical conversion materials with the surfaces of aluminum and aluminum alloys.

MIL-DTL-81706 - Chemical Conversion Materials For Coating Aluminum And Aluminum Alloys

This specification covers chemical conversion materials used in the formation of coatings by the reaction of the material with the surfaces of aluminum and aluminum alloys.

MIL-DTL-83488 - Coating, Aluminum, High Purity

This specification establishes the requirements for coating low alloy steel, stainless steel, aluminum alloy, copper alloy, and titanium alloy parts with high purity aluminum (99 percent plus) (see 6.1).

MIL-F-495 - Finish, Chemical, Black, For Copper Alloys

This document covers a black chemical finish for copper alloys.

MIL-G-19788 - Gold Plating (Electrodeposited) (S/S By Mil-G-45204)

MIL-HDBK-132 - Protective Finishes For Metal And Wood Surfaces

MIL-HDBK-1516 - Unified Code For Coatings And Finishes For Dod Materiel

MIL-HDBK-205 - Phosphate And Black Oxide Coating Of Ferrous Metals

This handbook provides a working knowledge of phosphate and black oxides coatings of ferrous metals as used by the Department of Defense for equipment and ordnance. It is not intended to be an exhaustive treatise on the subject, but rather to furnish detailed information on phosphate and black oxide coatings that have proved satisfactory in service. It is intended to supplement, but not replace, various specifications and standards covering these coatings.

MIL-HDBK-46164 - Rustproofing For Military Vehicles And Trailers

This handbook gives guidelines for rustproofing for military vehicles and trailers. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-721 - Corrosion And Corrosion Protection Of Metals (S/S By Mil-Hdbk-729)

MIL-HDBK-724 - The Stress Corrosion Cracking And Hydrogen Stress Cracking Of Metals(S/S By Mil-Hdbk-729)

MIL-HDBK-729 - Corrosion And Corrosion Prevention Metals

MIL-HDBK-729 was developed for the Department of Defense (DOD) in accordance with standard procedure and in compliance with policies and requirements of the Defense Standardization Program (DSP).

MIL-I-13857 - Impregnation Of Metal Castings

The impregnation processes covered by this specification shall be of the type as specified.

MIL-L-13762 - Lead Alloy Coating, Hot Dip (For Iron And Steel Parts) (S/S By Astm-A308)

MIL-L-13808 - Lead Plating (Electrodeposited)

This specification covers electrodeposited lead plating applied to iron and steel, copper, and copper-rich surfaces.

MIL-L-46064 - Lead-Tin Alloy Coating (Electrodeposited) (S/S By Astm-B200)

MIL-M-1250 - Machine, Sheet Metal Working

MIL-M-3171 - Magnesium Alloy, Processes For Pretreatment And Prevention Of Corrosion On (S/S By Sae-Ams-M-3171)

MIL-M-45202 - Magnesium Alloy, Anodic Treatment Of (S/S By Astm-D1732)

MIL-M-46080 - Magnesium Castings, Process For Anodic Cleaning And Surface Sealing Of (Use Mil-M-3171)

MIL-N-55392 - Nickel-Carbon, Porous, Electrodeposited, For Camouflage

MIL-P-18317 - Plating, Black Nickel (Electrodeposited) On Brass, Bronze, Or Steel

This specification covers one type, class, and grade of plating, black nickel (electrodeposited) for blackening brass, bronze and steel surfaces, applicable where a minimum distraction of the operators vision is desired as in the interior of optical instruments.

MIL-P-21415 - Protective Finish And Painting For Polaris Fleet Ballistic Missile

MIL-P-23408 - Plating: Tin-Cadmium (Electrodeposited)

This specification covers the requirements for three classes of tin-cadmium alloy plating.

MIL-P-27418 - Plating, Soft Nickel (Electrodeposited, Sulfamate Bath)

This specification covers the processes and requirements for soft nickel plating.

MIL-P-45209 - Palladium Plating, (Electrodeposited) (S/S By Astm-B679)

MIL-P-47090 - Passivation Of Corrosion And Heat Resistant Steels

MIL-P-47141 - Plating, Ternary Alloy (Electrodeposited)

MIL-P-47184 - Plating, Nickel-Tungsten, Electrodeposit On Aluminum Alloys, By Selective (Brush) Method

MIL-P-81728 - Plating, Tin Lead (Electrodeposited (S/S By Sae-Ams-P-81728)

MIL-P-81985 - Peening Of Metals

MIL-P-83348 - Powder, Plasma Spray

MIL-P-83348/1 - Powders, Plasma Spray Nickel Aluminum Powder, Type I, Composition G, Class 2

MIL-R-46085 - Rhodium Plating, Electrodeposited

This specification covers the requirements for the electrodeposition of rhodium over metallic surfaces.

MIL-R-46164 - Rustproofing For Military Vehicles And Trailers (S/S By Mil-Hdbk-46164)

This specification covers the application of corrosion preventative compounds to all sheet metal areas of vehicles and trailer, including the frame and all its structural members. When applied, such compounds shall prevent rusting of vehicles and trailers in all severe environmental areas (see 3.2).

MIL-R-81841 - Rotary Flap Peening Of Metal Parts (S/S By Sae-Ams2590)

This specification covers procedures and requirements for peening of metal parts with portable bonded-shot rotary flap wheels (see 6.1).

MIL-S-12515 - Surface Hardening: Flame And Induction (For Ferrous Alloys)

This specification covers the surface hardening of ferrous alloys by gas flame or electromagnetic induction heating followed by a quenching or relatively rapid cooling operation (see 6.1 and 3.3 and 3.5).

MIL-S-13165 - Shot Peening Of Metal Parts (S/S By Sae-Ams-S-13165)

MIL-S-47042 - Sealing, Surface, Of Anodized Magnesium Alloys, Process Requirements For

MIL-STD-1250 - Corrosion Prevention And Deterioration Control In Electronic Components And Assemblies (S/S By Mil-Hdbk-1250)

This standard establishes minimum requirements for procedures, materials and systems for protecting electronic components in DoD systems and assemblies from adverse environments. Protective measures shall be sufficient to maintain performance characteristics within specified limits both during and after exposure to moisture, high and low temperatures, corrosive gases, chemicals and microbial (fungal) attack.

MIL-STD-1500 - Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition

This standard covers the process and materials required for the electrodepostion of cadmium-titanium on high strength steel substrates.

MIL-STD-1501 - Chromium Plating, Low Embrittlement, Electrodeposition

This standard covers the engineering requirements for electrodeposition of hard chromium on high strength steel substrates and the properties of deposit. Subsequent heat treating techniques needed to insure low hydrogen embrittlement of steel is described.

MIL-STD-1503 - Preparation Of Aluminum Alloys For Surface Treatment And Inorganic Coating

This standard describes the cleaning, activation and under-plating process, and material required for aluminum and aluminum alloys prior to applying inorganic coatings. It is intended that this standard be used in conjunction with other process documents, where the technical requirements are for the application of surface treatments and inorganic coatings on aluminum and aluminum alloys.

MIL-STD-1504 - Abrasive Blasting

This standard covers the process and materials required for the abrasive blasting of military aircraft parts and missile components. Abrasive blast cleaning consists of forceful application of abrasive particles against the surface of metal parts.

MIL-STD-1516 - Unified Code For Coating And Finishes For Dod Materiel

This standard establishes a uniform code and to serve as a general guide to the election of suitable materials, procedures, and systems for cleaning, plating, painting and otherwise finishing metal, plastic, wood, and other surfaces, for use by the Department of Defense (DOD).

MIL-STD-1568 - Materials And Processes For Corrosion Prevention And Control In Aerospace Weapons Systems

This standard establishes the requirements for materials, processes and techniques, and identifies the tasks required to implement an effective corrosion prevention and control program during the conceptual, validation, development and production phases of aerospace weapons systems. The intent is to minimize life cycle cost due to corrosion and to obtain improved reliability.

MIL-STD-1587 - Materials And Process Requirements For Air Force Weapon Systems (S/S By Mil-Hdbk-1587)

This standard establishes the requirements for materials and processes used during design and production of aerospace weapon systems.

MIL-STD-1687 - Thermal Spray Processes For Naval Ship Machinery Applications

This standard covers thermal spray processes for machinery repair and corrosion of Naval ship machinery, except the spraying of aluminum for corrosion which is covered in DOD-STD-2138.

MIL-STD-171 - Finishing Of Metal And Wood Surfaces

This standard establishes and updates general finish codes and serves as a general guide to the selection of suitable materials, procedures, and system for cleaning, plating, painting and otherwise finishing of metal and wood surfaces.

MIL-STD-1819 - Performance Evaluation For Plasma Spray Masking Tape

This standard established the requirements for evaluating thermal spray masking tapes subject to grit blasting and plasma spraying operations.

MIL-STD-186 - Protective Finishing For Army Missile Weapon Systems

This standard establishes the minimum requirements for procedures, materials, and systems for cleaning, plating, painting and finishing metals, wood, electronic materials, parts and assemblies for rockets, guided missiles, and components to protect them from deterioration.

MIL-STD-1873 - Mass Finishing, Process For

This standard describes procedures, equipment types, and precautions to be considered in selection of methods for mass finishing metallic and non-metallic parts.

MIL-STD-1876 - Nitriding, Gaseous Atmosphere Processing For

This standard covers the requirements for gaseous atmosphere nitriding of aircraft quality steel parts and in-process heat treatment and machining operations.

MIL-STD-1878 - Carburizing, Gaseous Atmosphere, Process For

This standard covers the requirements and procedures for gas carburizing, heat treating and finishing operations used for parts in the manufacture of carburized tank engine components.

MIL-STD-1884 - Coating, Plasma Spray Deposition (S/S By Mil-Hdbk-1884)

The procedures covered by this standard are intended to ensure that plasma spray coating operations, either manual or automated, meet prescribed requirements.

MIL-STD-1886 - Tungsten Carbide-Cobalt Coating, Detonation Process For (S/S By Mil-Hdbk-1886)

This standard covers the procedure for applying tungsten carbide-cobalt coatings to metal parts by the detonation process and the acceptance criteria for the finished parts.

MIL-STD-1893 - Cleaning Electrochemically Machined Nickel Base Alloy Surfaces, Process For (Metric)

This standard defines the process used for removing contaminants from electrochemically machined surfaces of nickel base alloy parts.

MIL-STD-193 - Painting, Procedures And Marking For Vehicles, Construction Equipment, Material Handling Equipment, And Spare Parts

This standard establishes minimum requirements for materials to be used and procedures to be followed in surface preparation, surface treatment, plating and painting of vehicles, construction and material handling equipment, and markings so as to provide protection from the adverse effect of chemical and environmental conditions.

MIL-STD-2138 - Metal Sprayed Coatings For Corrosion Protection Aboard Naval Ships (Metric) (See Notice 2 For Replacement Information)

This standard covers the requirements for the use of metal sprayed coatings (aluminum) for corrosion control applications on board Naval ships.

MIL-STD-2161 - Paint Schemes And Exterior Markings For U.S. Navy And Marine Corps Aircraft

This military standard establishes the requirements for paint schemes and markings to be applied to the exterior surfaces of U.S. Navy and Marine Corps aircraft, including those procured for other government agencies and foreign countries under Navy contracts. The requirements for paint schemes and markings include size, color, and approximate placement locations, where applicable, as shown in Appendices A ?√ E. This standard also provides a mechanism to obtain approval for deviation from these requirements.

MIL-STD-2197 - Brush Electroplating on Marine Machinery

This standard covers standard practice for brush electroplating on marine machinery.

MIL-STD-40002 - Heat Treatment Coding System, General

This standard covers a variety of heat treatment procedures applicable to specific ferrous and nonferrous alloys.

MIL-STD-40009 - Cleaning And Passivation, Process For (Am350 And Am355 Stainless Steels)

This standard covers the process of cleaning and passivation performed on parts fabricated from precipitation hardenable stainless steels AM350 and AM355.

MIL-STD-753 - Corrosion-Resistant Steel Parts: Sampling, Inspection And Testing For Surface Passivation (S/S By Sae-Ams-Std-753)

This standard describes general and detailed methods of sampling and testing for surface passivity of corrosion-resistant steel parts. These tests may also be useful to determine if there is a need for passivation.

MIL-STD-808 - Finishes, Materials And Processes For Corrosion Prevention And Control In Support Equipment (S/S By Mil-Hdbk-808)

This standard establishes minimum requirements for finish systems for Air Force support equipment and also establishes a code system to specify those finish systems in a contractor generated drawings as required by procurement officers.

MIL-STD-865 - Selective Brush Plating, Electro-Deposition

This standard covers the process and materials for selective electro-deposition of various metals and alloys on ferrous alloys, aluminum alloys, copper alloys, nickel alloys and corrosion-resistant steel, etc.

MIL-STD-866 - Grinding Of Chrome Plated Steel And Steel Parts Heat Treated To 180,000 Psi Or Over

This standard establishes the requirements for grinding of martensitic high strength steel heat-treated to 180,000 pounds per square inch (psi), ultimate tensile strength (uts) and above, and the grinding of chromium plating applied to such high strength steel, when such parts are intended for use in components for man-rated flight hardware.

MIL-STD-868 - Nickel Plating, Low Embrittlement, Electro-Deposition

This standard covers the process and materials required for the electro-deposition of nickel on high strength steel substrates. Electro-deposited nickel is used for wear resistance, heat resistance, and as an undercoat for precious metals. Subsequent heat treating techniques needed to insure low hydrogen embrittlement of steel are also described. This standard meets the performance requirements of SAE-AMS- QQ-N-290 and may be used when SAE-AMS-QQ-N-290 is specified provided any unique requirements of SAE-AMS-QQ-N-290 are complied with.

MIL-STD-868-SUP - Nickel Plating, Low Embrittlement, Electro-Deposition

MIL-STD-868-SUP-1 - Nickel Plating, Low Embrittlement, Electro-Deposition

MIL-STD-869 - Flame Spraying

This standard covers the materials, procedures, and equipment for flame spraying of parts.

MIL-STD-870 - Cadmium Plating, Low Embrittlement, Electrodepositon

This standard covers the process and materials required for the electro-deposition of cadmium on high strength steel substrates. Subsequent heat treating techniques needed to insure low embrittlement of steel are also described. This process is not authorized for use on steel heat treated above 1.65 X 10 9 PASCAL's (Pa) (240,000 pounds per square inch {psi}) without the approval of the applicable procuring activity.

MIL-STD-871 - Electro-Chemical Stripping Of Inorganic Finishes

This standard covers the process and materials required for the stripping of inorganic finishes. Subsequent heat treating techniques needed to insure hydrogen embrittlement relief of the steel substrate are also described.

MIL-STD-889 - Dissimilar Metals

This standard defines and classifies dissimilar metals, and establishes requirements for protecting coupled dissimilar metals, with attention directed to the anodic member of the couple, against corrosion.

MIL-T-10727 - Tin Plating: Electrodeposited Or Hot-Dipped, For Ferrous And Nonferrous Metals (S/S By Astm-B545, Astm-B339)

This specification covers the requirements for electrodeposited tin and hot-dipped tin coatings on ferrous and nonferrous metals.

MIL-T-12879 - Treatments, Chemical, Prepaint And Corrosion Inhibitive, For Zinc Surfaces (S/S By Astm-D2092)

This specification covers prepaint and corrosion inhibitive chemical (including electrochemical) treatments for electroplated, hot-dipped, or solid zinc sulfaces and zinc-base alloy cast surfaces (see 6.1).

MIL-T-81955 - Tin Plating, Immersion For Copper And Copper Alloys

This specification covers the requirements for tin plating deposited by immersion, without an external potential, on copper and copper alloys.

MIL-Z-17871 - Zinc-Coating (Hot-Dip Galvanizing) (S/S By Astm-A153)

NAS4006 - Aluminum Coating

QPL-81706-16 - Chemical Conversion Materials For Coating Aluminum And Aluminum Alloys (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)

QQ-C-320 - Chromium Plating (Electrodeposited) (S/S By Sae-Ams-Qq-C-320)

QQ-N-290 - Nickel Plating (Electrodeposited) (S/S By Sae-Ams-Qq-N-290)

This specification covers the requirements for electrodeposited nickel plating on steel, copper and copper alloys, and zinc and zinc alloys.

QQ-P-35 - Passivation Treatments For Corrosion-Resistant Steel (S/S By Astm-A967 Or Sae-Ams-Qq-P-35)

QQ-P-416 - Plating, Cadmium (Electrodeposited) (S/S By Sae-Ams-Qq-P-416)

This specification covers the requirements for electrodeposited cadmium plating.

QQ-S-365 - Silver Plating, Electrodeposited, General Requirements For (Users May Consult Astm-B700)

QQ-Z-325 - Zinc Coating, Electrodeposited, Requirements For (S/S By Astm-B633)

This specification covers the requirements for electrodeposited zinc coatings. The terms "coating" and "plating" are used interchangeably throughout the specification.

TT-C-490 - Chemical Conversion Coatings And Pretreatments For Metallic Substrates (Base For Organic Coatings)

This specification covers processes, pretreatments, and pre-primer surface preparations of metallic substrates for coating applicators. It covers metal surface preparation for delaying corrosion initiation and promoting primer adhesion. In addition, this specification covers the testing requirements for qualification of conversion coatings, the pretreatments and pre-primer coatings.

le and hook-on laryngoscope of the Wisconsin design, suitable for use in medical procedures concerning the human larynx.

MIL-L-36896 - Laryngoscope, Fiber Optics (Holinger And Jackson Designs)

This specification covers fiber optic laryngoscopes, of the Holinger and Jackson designs, suitable for surgical procedures involving the larynx.

MIL-L-36947 - Lumbar Puncture Kit

MIL-L-37126 - Lens, Diplopia Test, Red (S/S By A-A-54008)

This specification covers a red plastic lens suitable for use in the detection of diplopia.

MIL-L-37704 - Light, Head, Diagnostic, Lempert-Storz (S/S By A-A-54771)

This specification covers an adjustable headlight, of the Lempert-Storz design, suitable for use in operating and other medical procedures.

MIL-M-16990 - Magnifier, Folding, 14-15X

MIL-M-36198 - Magnet, Eye, Electric, Lancaster, Explosion-Proof 110 Volt, 60 Cycle, Ac

MIL-M-36249 - Mounting Board, Electrocardiograph Records

MIL-M-36431 - Mask, Surgical, Disposable (S/S By Mil-M-36954)

MIL-M-36600 - Manometer, Spinal Fluid, Compressed Scale, Disposable

MIL-M-36808 - Mallet, Bone Surgery, Kirk, Metal

MIL-M-36954 - Mask, Surgical, Disposable (S/S By A-A-54372, A-A-54435, And A-A-51070)

MIL-M-36958 - Manometer, Spinal Fluid, Water Type, Disposable (S/S By A-A-54786)

This specification covers one type of a sterile disposable spinal fluid manometer suitable for measuring spinal fluid pressure.

MIL-M-37114 - Mask, Oxygen, Plastic, Disposable

MIL-M-37553 - Mask, Oxygen, Plastic, Disposable, Oronasal (S/S By A-A-54814)

This specification covers one type of disposable oroasal mask of flexible plastic complete with tube and inlet connector for the purpose of administering oxygen.

MIL-M-42053 - Microscope, Surgical, Co-Observation, Binocular 120/230 Volt, 50-60 Hertz, Ac (S/S By A-A-54474)

MIL-N-36124 - Needles, Hypodermic, Disposable (S/S By A-A-54733)

MIL-N-36129 - Nebulizer, Medicinal, Plastic

MIL-N-36149 - Needles, Hypodermic, Tonsil (S/S By A-A-54826)

MIL-N-36214 - Needles, Hypodermic, Spinal Anesthesia, Disposable

MIL-N-36220 - Needle, Hypodermic, Malleable, Lemmon, Spinal Puncture (S/S By A-A-54489)

MIL-N-36305 - Needles, Hypodermic, Blood Collecting, Double Pointed, 20 Gage, 12S

This specification covers double pointed, blood collecting hypodermic needles.

MIL-N-36319 - Needles, Hypodermic, Cartridge Type, Disposable (S/S By A-A-54664)

MIL-N-36546 - Needles, Hypodermic, Spinal Puncture (S/S/ By A-A-54808)

This specification covers spinal puncture hypodermic needles suitable for use in administering spinal anesthesia.

MIL-N-36632 - Nail And Bone Plate, Hip, Jewett

MIL-N-36667 - Nozzle, Automatic, Jet Hypodermic Injection Apparatus

MIL-N-36930 - Needle, Biopsy, Disposable (S/S By A-A-54827)

This specification covers sterile, disposable, axially reciprocating biopsy needles with a 20 mm specimen notch in the obturator.