MIL-DTL-13924D
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3
and 4 of this specification. This section does not include documents in other
sections of this specification or recommended for additional information or as
examples. While every effort has been made to ensure the completeness of this list,
document users are cautioned that they must meet all specified requirements
documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications,
standards, and handbooks form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those listed
in the issue of the Department of Defense Index of Specifications and
Standards(DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-C-53072
Chemical Agent Resistant Coating (CARC) System Application
Procedures And Quality Control Inspection
(Unless otherwise indicated, copies of the above specifications, standards, and
handbooks are available from the Defense Automated Printing Service (DAPS), Building 4D,
700 Robbins Avenue, Philadelphia, PA 19111-5094).
2.3 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of
the documents which are DoD adopted are those listed in the issue of the DoDISS cited
in the solicitation. Unless otherwise specified, the issues of documents not listed
in the DoDISS are the issues of the documents cited in the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B117
Operating Salt Spray (Fog) Apparatus
(DoD adopted)
ASTM F519
Mechanical Hydrogen Embrittlement Testing of Plating Processes
and Aircraft Maintenance Chemicals
(Application for copies should be addressed to the American Society for Testing and
Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE)
AMS 2759/9
Hydrogen Embrittlement Relief (Baking) Of Steel Parts
(Application for copies should be addressed to the Society Of Automotive
Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.)
2.4 Order of precedence. In the event of a conflict between the text of this
document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business