MIL-DTL-81706B
3.12 Instructions for use. All containers shall have specific instructions for mixing, using,
and applying the chemical conversion materials. The instructions shall be either marked or
labeled on the container, or included on an instruction sheet in a plastic envelope attached
securely to the outside of the container. The methods and materials used to provide the marking
or labeling, for all forms except form VI, shall be water-repellent to ensure that the instructions
remain legible under the exposure conditions of the container.
3.13 Workmanship. The chemical conversion materials shall be uniform in composition
and quality, and be free from impurities and other defects that impair usability and adversely
affect performance. The chemical conversion materials furnished in this specification shall be
identical in composition and coating characteristics to the qualification sample.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. Qualification inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 Qualification inspection. Qualification inspection shall consist of all tests specified in
table II.
4.2.1 Samples. The qualification test samples for application methods A, B, and C (see
1.2.4) shall consist of individual containers of premeasured material to make up the following:
a. Four individual ten-gallon baths for immersion application.
b. Four individual one-gallon baths for spray application.
c. Four individual one-gallon baths for brush application.
The qualification sample for application method D (see 1.2.4) shall consist of twelve applicator
devices, ready for use.
NOTE: The qualifying activity (see 6.5) does not measure any of the individual component
chemicals. They only add water, if applicable, to the premeasured quantity (forms I, II, and V).
The qualifying activity does, however, furnish the necessary test panels for qualification
inspection. The samples shall be forwarded as directed in the letter of authorization (see 6.5) and
be identified by securely attached tags marked with the following information:
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business