MIL-STD-866C
1. SCOPE
1.1 Scope. This standard establishes the requirements for grinding of martensitic high strength steel heat-treated to 180,000 pounds per square inch (psi), ultimate tensile strength (uts) and above, and the grinding of chromium plating applied to such high strength steel, when such parts are intended for use in components for man- rated flight hardware.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 4 and 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all the specified requirements of the documents cited in this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-867 Temper Etch Inspection
(Inactive)
(Copies of these documents are available online at https://assist.daps.dla.mil.online/start/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government standards and publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
SOCIETY OF AUTOMOTIVE ENGINEERS INTERNATIONAL (SAE)
SAE-AMS-H-6875 Heat Treatment of Steel Raw Materials
SAE-AMS-2644 Inspection Materials, Penetrant
(Copies of these documents are available online at www.sae.org or from the Society of
Automotive Engineers International, 400 Commonwealth Drive, Warrendale, PA 15096-
1001.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ASTM E-1444 Standard Practices for Magnetic
Particle Inspection
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business