MIL-DTL-14072F
Type I (Exposed). Type I surfaces are areas, either exposed to view when
equipment is in operating or traveling condition, or areas not exposed to view but subject
to combined direct action of climatic elements. Climatic elements include temperature
extremes, humidity extremes, rain, hail, snow, sleet, salt-laden air, industrial
atmospheres, direct solar radiation, dust, and wind blown sand. For example, the outside
surfaces of any equipment are Type I areas; the inside surfaces of an open frame motor
are Type I areas.
Type II (Sheltered). Type II surfaces are areas not exposed to view during
equipment operation and not subject to direct action of rain, hail, snow, sleet, direct solar
radiation, and sand. For example, the interior surfaces of a radio receiver or switchboard
are considered Type II areas.
Any Type I finish is adequate protection for Type II exposures.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4 or
5 of this specification. This section does not include documents cited in other sections of
this specification or recommended for additional information or as examples. While
every effort has been made to ensure the completeness of this list, document users are
cautioned that they must meet all specified requirements of documents cited in sections 3,
4 or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications,
standards, and handbooks form a part of this document to the extent specified herein.
Unless otherwise specified, the issues of these documents are be those cited in the
solicitation or contract.
FEDERAL SPECIFICATIONS
A-A-59298
-
Tape, Pressure Sensitive Adhesive
A-A-59313
-
Thread Compound, Antiseize, Zinc, Dust-
Petrolatum
TT-C-490
-
Chemical Conversion Coatings and
Pretreatments for Ferrous Surfaces (Base for
Organic Coatings).
TT-P-28
-
Paint, Aluminum, Heat Resisting (1200°F).
TT-P-1757
-
Primer Coating, Alkyd Base, One Component.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business