NOT MEASUREMENT
SENSITIVE
MIL-DTL-5002E
12 July 2011
SUPERSEDING
MIL-S-5002D
30 November 1989
DETAIL SPECIFICATION
SURFACE TREATMENTS AND INORGANIC COATINGS
FOR METAL SURFACES OF WEAPONS SYSTEMS
Reactivated after 12 July 2011 and may be used for new
and existing designs and acquisitions.
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers the requirements for cleaning, surface treatment, and
application of inorganic coatings for metallic surfaces of weapons systems parts.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort
has been made to ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements of documents cited in sections 3 or 4 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to:
Commander, Naval Air Warfare Center Aircraft Division, Code 4L8000B120-3,
Highway 547, Lakehurst, NJ 08733-5100 or emailed to michael.sikora@navy.mil.
Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
AREA MFFP
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business