MIL-DTL-83488D
AMERICAN SOCIETY FOR TESTING AND MATERIALS STANDARDS
ASTM E18
Rockwell Hardness and Rockwell Superficial Hardness of
Metallic Materials
ASTM B117
Operating Salt Spray (Fog) Apparatus (DoD Adopted)
ASTM B487
Measurement of Metal and Oxide Coating, Thickness by
Microscopic Examination of a Cross Section, Method of (DoD
Adopted)
ASTM B499
Measurement of Coating Thickness by the Magnetic Method
Nonmagnetic Coatings on Magnetic Base Metals (DoD
Adopted)
ASTM B567
Measurement of Coating Thickness by the Beta Backscatter
Method (DoD Adopted)
ASTM E1004
Test Method for Electromagnetic (Eddy-Current)
Measurements Of Electrical Conductivity
(Application for copies should be addressed to the American Society for Testing and Materials,
100 Barr Harbor Drive, West Conshohocken PA 19428-2959, (610-832-9500))
SOCIETY OF AUTOMOTIVE ENGINEERS
AMS-QQ-A-250/4
Aluminum Alloy 2024, Plate and Sheet
AMS-QQ-A-250/12
Aluminum Alloy 7075, Plate and Sheet
AMS- 6350
Steel Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28 0.33C)
(SAE 4130)
(Application for copies should be addressed to the Society of Automotive Engineers, 400
Commonwealth Drive, Warrendale, PA 15096)
2.4
Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3.
REQUIREMENTS
3.1
Materials. The material shall be capable of conforming to the requirements of this
specification and in accordance with 3.1.1.
3