MIL-DTL-14072F
APPENDIX A
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AMS-M-3171
-
Magnesium Alloy, Processes for Pretreatment
and Prevention of Corrosion on.
SAE-AMS-QQ-P-416
-
Plating, Cadmium (Electrodeposited).
(Copies of these documents are available from www.sae.org or SAE World Headquarters,
400 Commonwealth Drive, Warrendale, PA 15096-0001.)
SOCIETY OF PROTECTIVE COATINGS
SSPC Paint 6
-
Commercial Blast Cleaning, Surface Preparation.
SSPC Paint 10
-
Near-White Blast Cleaning, Surface Preparation.
(Copies of these documents are available from https://www.sspc.org or The Society for
Protective Coatings, 40 24th Street 6th Floor, Pittsburgh, PA 15222-4656. ).
A.2.4 Order of precedence. In the event of a conflict between the text of this
document and the references cited herein, the text of this document takes precedence.
Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
A.3 REQUIREMENTS
A.3.1 Cleaning. Unless otherwise specified in the end item specification,
cleaning procedures shall be in accordance with TT-C-490 or as described herein.
Cleaning may be accomplished by:
a. Chemical methods such as solvent cleaning, alkaline cleaning, acid
cleaning, pickling, descaling with hydride, or paint stripping; or,
b. Electrochemical cleaning methods such as electrolyte alkaline,
electropolishing, or electrolytic pickling; or,
c. Mechanical means such as blasting, chipping, wire brushing, or
grinding.
After cleaning, all surfaces shall be kept free from dirt, dust, finger marks, and other
contaminants, until treated.
62
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business