MIL-STD-171 Finishing Of Metal And Wood SurfacesThis standard establishes and updates general finish codes and serves as a general guide to the selection of suitable materials, procedures, and system for cleaning, plating, painting and otherwise finishing of metal and wood surfaces.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65

1.9.6.1

0.0004-0.0007 inch (10-18 um) thick.  Without supplemental treatment.

1.9.6.2

0.0004-0.0007 inch (10-18 um) thick.  With supplemental chromate(finish 6.1.1.2)

1.9.6.3

0.0004-0.0007 inch (10-18 um) thick.  With supplemental phosphate(finish 5.1.1)

1.9.7

Zinc-Tin, Electrodeposited, AMS 2434

1.9.7.1

0.0003-0.0005 inch (8-13 um) thick.  Without supplemental treatment.

1.9.7.2

0.0003-0.0005 inch (8-13 um) thick.  With supplemental treatment as specified.

*

1.10

Copper coating, electrodeposited, AMS 2418

1.10.1

Class 1, 0.0010 inch (25 μm) thick

1.10.2

Class 2, 0.0005 inch (13 μm) thick

1.10.3

Class 3, 0.0002 inch (5 μm) thick

1.10.4

Class 4, 0.0001 inch (2.5 μm) thick