MIL-ST0-171F
TABLE XIX. Miscellaneous paint finishes for wood. Finish
No. Requirements
29.1 Stain-varnish-wax. Apply olive-drab stain to bare wood. Let dry. Apply two coats varnish, MPI#28. Let each coat dry thoroughly. Apply wax, MIL-W-3688. Let dry. Polish with clean dry cloth.
29.2 Oil-shellac-varnish. Apply linseed oil, ASTM 0234, to bare wood. Let stand for 24 hours. Squeegee off excess. Let dry for at least 16 hours. Apply one coat shellac varnish, ASTM 0360, orange, grade A. Let dry. Apply two coats of varnish, MPI#28. Let each coat dry thoroughly.
29.3 Oil-shellac-clear lacquer. Apply linseed oil, ASTM 0234, to bare wood. Let stand for
24 hours. Squeegee off excess. Let dry for at least 16 hours. Apply three coats of shellac varnish, ASTM 0360, bleached, refined. Let each coat dry thoroughly, and rub each coat lightly with fine sandpaper. Apply two coats of clear lacquer, A-A-
3003. Let dry between coats.
29.4 Oil-shellac-lacquer. Apply linseed oil, ASTM 0234, to bare wood. Let stand for 24 hours. Squeegee off excess. Let dry for at least 16 hours. Apply three coats of shellac varnish, ASTM 0360, bleached, refined. Let each coat dry thoroughly, and rub each coat lightly with fine sandpaper. Apply white enamel, MIL-0TL-11195 to a thickness of 2.5 to 3.0 mils, approximately 3 coats, if applied hot, 6 coats if applied cold.
29.5 Preservative-shellac-varnish. Apply finish 25.2 or 25.3 Apply one coat shellac
varnish, ASTM 0360, orange, grade A. Let dry. Apply one coat of varnish, MPI#28. Let dry.
29.6 Preservative-varnish. Apply finish 25.2 or 25.3. Apply two coats varnish, MPI#28.
29.7 For wood components or small arms. Apply protective finish as specified
29.8 Fire retardant paint. Apply over wood as specified on drawing or in contract
40
MIL-ST0-171F
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business