MIL-STD-171 Finishing Of Metal And Wood SurfacesThis standard establishes and updates general finish codes and serves as a general guide to the selection of suitable materials, procedures, and system for cleaning, plating, painting and otherwise finishing of metal and wood surfaces.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65

TABLE XX. Miscellaneous finishes not classified.

Finish

No. Requirements

30.1 Filler, graduation, TT-F-325, MIL-PRF-22750 or MIL-DTL-53039

30.1.1 Type I, crayon type; color as specified; black, deep red, white, translucent white

30.1.2 Type II, paste type; color as specified; black, deep red, white, translucent white

30.21/ Non-skid coating, 1/32 to 1/16 inch dry film thickness, MIL-PRF-24667, color as specified

30.31/ Walkway coating and matting, nonslip, A-A-59166, type and color as specified

30.4 Coating, luminescent, phosphorescent

30.4.1 Discontinued, use finish 30.4.2

30.4.2 Luminescent material as specified.

30.4.3 Discontinued, use finish 30.4.2

30.5 ASTM D3955: applied in accordance with MIL-T-152. For moisture and fungus proofing of electronic and associated equipment

30.6 MIL-I-46058, conformal coating for printed wiring boards

30.7 MIL-PRF-46010, Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting

30.8 MIL-PRF-46147, Lubricant, Solid Film, Air Cured (Corrosion Inhibiting)

General finish requirement headings shall not be specified. The specific finish numbers(s) only shall be specified. See page iii for the proper method of specifying finishes.

1/ when non-skid MIL-PRF-24667 (walkway coating and matting) or nonslip (A-A-59166) are required for CARC environments, the sequence of application shall be:

CARC primer/MIL-PRF-24667 or A-A-59166/CARC top coat